No Drill Jessem Stock Guides Install | Table Saw Safety | Tool Upgrades

Table Saw Safety Tool Upgrade: Functionality without losing the ability to use other jigs.

Want to prevent kick back on the table saw? This tool upgrade will upgrade your table saw safety without losing functionality.

Today I show you how to make a jig for your Jessem Clear Cut TS Stock Guides so that you don’t have to drill into your fence. Jessem Stock Guides helps to steer your sheet goods properly towards the fence in a safe and accurate way. Using the stock guides will keep longer lumber from wandering away from the fence which could cause kick back. I built a removable jig using Magswitch Magjig 95 and some scrap plywood. Using this jig will allow me to quickly remove it completely and then use any other table saw jig. This project is quick and simple, but definitely something that will increase your table saw safety. Let’s get to it.

Welcome to Two Bit Woodworks, thank you for stopping by to view the latest project. Please make sure to follow me on YouTube, Instructables, Facebook, and Instagram so you don’t miss anything along the journey.

Affiliate links are used on this page, please go to the disclosure page for more information.

Materials Needed

• 2′ x 4′ sheet of 3/4″ Purebond Plywood
• 3/4″ wood screws
• Jessem Clear Cut TS Stock Guides
• Magswitch Magjig 95

Table saw safety is paramount in any woodworking shop now matter if it’s a professional shop or a home small garage shop like mine. I am very happy to be able to keep the ability to use other jigs on the table saw and still keep the functionality and safety boost that you get from the Jessem Clear Cut TS Stock Guides.

I hope you enjoyed the video and if you have any questions or comments, please leave them below, I would love to hear from you! Please like and subscribe at Instructables, as well as, on YouTube.

Thanks for stopping by, come back soon, and take care.